H264 1.3 Mega Pixel CCD IP camera -1280 x 960 High Resoloution
The ANT-3531 is a High Definition H.264 IP video camera offering 1280 x 960 pixels of resolution at 22.5 fps. Using a CCD sensor as opposed to CMOS the ANT3531 offers a wide dynamic range for low light and brifgt light conditions.
Fully integrated into a standard C-Mount lense housing the ANT3253 can accomodate a range of standard C-Mount lenses.
The integrated network video server uses the latest High Definition H.264 codec and supports full two way audio. An Alarm and sensor input and output is provided . A broad range of network protocols are supported including TCP/IP, Multicast, HTTP, SMTP, FTP, DHCP, DNS, Dynamic DNS, RTP, RTSP .
The ANT3531 may be used with the free CMS (Control Management Software) which runs on any standard PC or with a dedicated HD Video Decoder (ANT-32000) if no PC is available.
The ANT32000 decoder has an HDMI output whch can drive a standard TV display.

Features:
Detailed Specification
| Section | Specification | Description | |
| System | Operation System | Embedded Linux | - |
| Main Memory | 128Mbyte DDR2 | - | |
| Flash | 128Mbyte NAND FLASH | - | |
| Video | Algorithm | H.264/MJPEG | |
| Image | 1/3" 1.3M CCD Image Sensor | SONY | |
| Resolution | 1280x960/22.5fps ~ CIF/30fps | 13 resolution steps | |
| Bitrate | 32kbps ~ 8Mbps | ||
| Audio | Algorithm | G.711 | - |
| Input | 1 x 3.5mm JACK, LINE IN | Single Mono | |
| Output | 1 x 3.5mm JACK, LINE OUT | Single Mono | |
| Sample Rate | 8 kHz | - | |
| Bitrate | 64kbps | - | |
| Alarm/ | Sensor Input | 1 x Input | Default NO, 1 x Sensor In, 1 x GND |
| Sensor | Alarm Output | 1 x Output | Default NO, 1 x NO, 1 x COM |
| Network | RS485 | 1 x Port | Camera PTZ Control |
| LAN | 1 x RJ45, 10/100M Ethernet | - | |
| Security | Supported | - | |
| Event | Motion detection | Supported | |
| Sensor | Supported | ||
| Pre/post alarm | Supported | ||
| Camera control | PTZ | - | |
| Preset | - | ||
| Notify | Alarm / E-mail | ||
| Network | TCP/IP, Multicast, HTTP, SMTP, FTP, DHCP, DNS, Dynamic DNS, RTP, RTSP | ||
| Language | - | ||
| Power | Input | 2 x Terminal Block, DC12V/0.6A | |
| PoE | (Supported) | 802.3af | |
| Certification | (CE/FCC/MIC) | ||
| General | 2x System Status LED | ||
| 1 x Default Setting Button | - | ||
VIDEO & PC SERVER DECODERS
NETWORK CAMERAS-HD MPixel
NETWORK CAMERAS- PAL/NTSC
SOFTWARE
True CMS multi viewing/ control
SYSTEMS & SOLUTIONS
Please fill out the short form below to receive further data.