You are here: Home / NETWORK CAMERAS-HD MPixel / ANT-3530 2.0MP HD Camera
Detailed Specification
| Section | Specification | Description | |
| System | Operation System | Embedded Linux | - |
| Main Memory | 128Mbyte DDR2 | - | |
| Flash | 128Mbyte NAND FLASH | - | |
| Video | Algorithm | H.264/JPEG Encoding/Decoding | |
| Image | 1/2.5" CMOS Image sensor | ||
| Lens | 1/3.6", f=4.5~45.0mmm F1.8~2.2 | ||
| Output | 1 x HDMI type A, HDMI TX | - | |
| Resolution | 1920x1080/30fps ~ CIF/30fps | 18 resolution steps | |
| Bitrate | 32kbps ~ 8Mbps | ||
| Audio | Algorithm | G.711 | - |
| Input | 1 x 3.5mm JACK, LINE IN | Single Mono | |
| Output | 1 x 3.5mm JACK, LINE OUT | Single Mono | |
| Sample Rate | 8 kHz | - | |
| Bitrate | 64kbps | - | |
| Alarm/ | Sensor Input | 1 x Input (2 x Terminals) | Default NO, 1 x Sensor In, 1 x GND |
| Sensor | Alarm Output | 1 x Output (2 x Terminals) | Default NO, 1 x NO, 1 x COM |
| Network | RS422/485 | 1 x Port (2 x Terminals) | Camera PTZ Control |
| LAN | 1 x RJ45, 10/100M Ethernet | - | |
| Storage | External Backup | 1 x SD Interface | - |
| Security | Supported | - | |
| Event | Motion detection | Supported | |
| Sensor | Supported | ||
| Pre/post alarm | Supported | ||
| Camera control | PTZ | - | |
| Preset | - | ||
| Notify | Alarm / E-mail | ||
| Network | TCP/IP, Multicast, HTTP, SMTP, FTP, DHCP, DNS, Dynamic DNS, RTP, RTSP | ||
| Language | - | ||
| Power | Input | 2.5ΦPower Jack, 12V/0.5A | |
| External Power Adaptor | Output :12V/1.5A, Input : AC100V~220V | ||
| PoE | - | ||
| Certification | - | ||
| General | 2x System Status LED | ||
| 1 x Default Setting Button | - | ||
| WxDxH = 64x136x70 | |||
Click here to go back to product
