Full 1080p (Low Latency) HD over IP Encoder/Decoder (ANT-4000)

+44 (0)1628 626098

sales@antrica.com

					1				


Low Latency 80mS end to end H264 video plus audio over IP.

The NEW ANT-4000E and ANT-4000D are High Definition H264 video server/encoder  & decoder with an end to end video delay of 80mS. Unlike many encoders these units can stream up 1920 x1080 at 60 frames per second. Applications include sending PC images, Medical scanner outputs, video images , Digital Signage inputs and other HD sources. HDMI, VGA, CVBS, Component and DVI-D are all supported.
Stream to software decoders like VLC player , BUZZ player + others. RTSP & MPEG-TS supported.

Compare this Product with other Antrica Encoders and Decoder CLICK HERE 


Transmitter (ANT-4000E)

Video

  • State-of- the art Compression Algorithm, H.264 Baseline level 4.2
  • 24 bit RGB + YUV (4:2:2)
  • Low latency encode decode typ. 30mS (when used with ANT-4000D)
  • Single stream + Stereo Audio
  • Video and PC interfaces supported YCbCr & RGB
  • HDMI v1.3 (DVI-D) VGA, Composite Video and Component video supported
  • YPbPr Component plus CVBS composite video
  • Compression and Decompression with multiple Resolution options

: 1920x18080i60/P60, 1280x720P60, 720x480i60/P60

: WSXGA + (1680 x1050), SXGA (1280×1024)

WXGA(1280×800) XGA (1024×768) SVGA (800×600) , VGA

(640×480)

Wide Range of Video Transmission Rates : 100kbps ~ 12Mbps

  • Various Transmission Modes : I frame GOP mode, Slice Mode (I frame in P frames)
  • HDCP compliant v1.1

Audio

  • 2x HDMI audio supported – Compressed or uncompressed
  • Stereo Audio one way 44.1kHz / 48kHz , 16 bit ADC.
  • RCA stereo jacks and mini stereo headphone jacks

Network

  • Static IP & Dynamic IP (DHCP) Support 10/100 ethernet
  • One to One Connection & One to Multiple Connection
  • Multi-Casting and Simulcast modes
  • Various Protocols supported : TCP/IP, UDP, Multicast, DHCP, HTTP,  RTSP,
  • RTSP , One to one proprietary low latency plus MPEG-TS (Video only)
  • PLC modem connection

Serial Data

  • Two serial ports : RX and TX bi directional data
  • 3.3v TTL serial data (external level shift for RS232 required)
  • Data pass-through mode : Serial data communication between Encoder – Decoder
  • Virtual serial cable between encoder and decoder, Bi Directional.