ENCODER 1080P60 Encoder Streamer – ONVIF PSIA – HDSDI HDMI (ANT-45000)

+44 (0)1628 626098



The ANT-45000 is a new full HD 1080P60 ONVIF PSIA video Encoder (and Decoder)  supporting 3G HD-SDI & HDMI Inputs.
Can be used as a standalone Encoder with third party VMS CMS software that is ONVIF or PSIA complaint or with another ANT-45000 programmed to be a hardware Decoder
(Note! The ANT-45000 is also a full HD 1080P60 Decoder – see other listing on this website here ANT-45000 Decoder)

Supporting RTSP or MPEG TS Encoding of ONVIF and PSIA compliant RTSP streams with up to 4 different streams

Full HD encoding of PC DVI/HDMI outputs or other equipment which outputs RGB 1080P via DVI HDMI output at 60Hz.

MPEG Transport Stream (H264) and MJPEG streaming also supported  and resolutions from 352×240 up to 1920 x1080 at 60 frames/sec.

The ANT-45000 supports ONVIF G.711 audio plus enhanced High Quality AAC audio streams. Audio can be Encoded as either HDMI or 3G HD-SDI embedded or as analogue via  stereo analogue audio jack input. Two way audio is also supported.

RS485 232/422 serial interfaces allows the use of a remote Joystick to control an HD-SDI or HDMI equipped PTZ camera
12volts or PoE powered and additional dual USB Edge recording capability

Compare this Product with other Antrica Encoders and Decoder CLICK HERE 

ONVIF and PSIA Encoder Streamer RTSP and MPEG TS streams

Max. 60fps at 1920 x 1080 Encoder or Decoder

Two Way Audio Communication (G.711, AAC)

3G/HD/SD-SDI & HDMI Outputs

Audio Embedded in 3G/HD/SD-SDI &HDMI or analogue

Over 30 Types of PTZ Protocol Supported

PoE (Power Over Ethernet)

USB Recording

Watchdog for System Recovery

RS-232, RS-422/485 Communication

Motion Detection

2CH Sensor Input / 2CH  Alarm Output

Adjustable Video Bitrate : 32Kbps ~ 20Mbps for Primary Video, 32Kbps ~ 1Mbps for Secondary Video

Adjustable Video Data Bandwidth : 2,400bps ~ 115,200bps

Various Protocols : TCP/IP, Multicast, UDP, HTTP, SMTP, FTP, DHCP, DNS, Dynamic DNS, RTP, RTSP, SNMP

Full Technical Support with SDK & API