UAV Mini 1080P30 Streaming Video Encoder / Decoder Module for UAV Drone (ANT-1771)

+44 (0)1628 626098


The ANT-1771 H264 Video encoder is designed specifically for UAV Drone applications. Supporting Dual Channel HD-SDI and Quad Composite video inputs the ANT-1771 can stream in both RTSP and MPEG TS formats over an Ethernet connection to the Drones Radio link. Using a low latency player/ decoder video latency of under 100mS is achieved in this small low weight module. The ANT-1771 can be configured to be an Encoder or a Decoder allowing for hardware to hardware low latency links. The UAV Mini also supports video plus audio streaming  and multi channel Video support: Low power 4 watts

4 x D1 channels or 2x 720P30 , 1x 720P60 , 1x1080P30 plus 1xD1 , 2x 1080P15 or 1x 1080P30

Other features can be added such as Scaling , graphics overlay, PIP, Stabiliser, Video analytics (latency will be affected)
STANAG 4609 and Transport Stream data inc meta data support.

Unicast Multicast Broadcast UDP RTP and RTSP support with a web based interface to set up the encoder or a dedicated software app.
Windows Android and iOS web browser based applications over networks
API based control applications over networks and serial comms.
Low Latency stream player provided or other generic players like VLC supported (not low latency if third party players used)

Download product documentation



Freescale i.MX6 SOC

4 x Cortex-A9 @800 MHz

NEON SIMD Coprocessor


Up to 4GB MB LPDD2

Up to 8Gb NAND Flash

Video In

Main Board

CVBS x 4

Add-on Module

HD-SDI x 2

LVDS + Parallel


Main Board

CVBS x 4

Add-on Module

HD-SDI x 2

Audio In

Stereo Line-in


Audio Out

Stereo Line-out

Stereo Speakers

H.264 Codec


Encoding Resolutions

4 x D1

2 x 720p30

1 x 720p60

1 x 1080p30 + 1 x D1

1 x 1080p30

2 x 1080p15

Up to 25Mbps bit-rate

Decoding Resolutions

4 x D1

2 x 720p60

2 x 1080p30

1 x 1080p60


Ethernet 10/100

Storage Media

SD card (SDIO)

NAND Flash 2Gbit

Serial interfaces




8 x GPIO


Main Board 80x50x10 mm

Main Board + Add-on Module80x50x13 mm

Operating Temperature

-40C to +85C


3.3V DC