Video to VGA Converter - ANT-2100
The ANT-2100 Video to VGA converter is specifically designed for high quality CCTV and broadcast applications. The ANT-2100 allows any standard LCD or Plasma display to be used as a high quality video monitor. Interlaced CVBS video is converted into Progressive scan using pixel accurate de-interlacing techniques. Motion adaptive techniques are employed to give crisp video displays. Image enhancement techniques are also employed to compensate for blurring, preserve edges, 3D noise reduction , cross colour suppression and numerous other techniques to improve image quality.
Features:
- De-Interlace composite video for progressive display
- Programmable VGA resolution: VGA to SXGA
- Programmable refresh rate 60 or 75 Hz (NTSC/ PAL)
- Composite Video input and VGA output
- iMARV pixel accurate motion adaptive de-interlacing
- Multi directional edge preservation
- Flicker and blur correction
- 3D noise reduction
- Sharpness enhancement feature for clearer images
- Luminance and Chrominance transient improvement
- Black and White level extension
Benefits:
- 12 volt DC supply (power adapter included)
- Allows progressive PC LCD and plasma displays to be used as high quality CCTV video monitors
- Removes the jagged edges associated with most de-interlacing techniques for smooth video
- Adaptive de-interlacing chooses best method depending on level of motion in each pixel of video
- Increased sharpness of images and improved contrast with B+W night scenes
- Highest quality chip technology used for best video image quality under all conditions
- Use low cost LCD displays instead of expensive and space consuming CRTs
- Works with colour or night time B+W scenes
- Use low cost PC LCD displays as high quality CCTV monitors Video to VGA Converter
- Use low cost PC LCD displays as high quality CCTV monitors
Detailed Specification
Video Input
- Connector type: BNC connector
- Composite video: PAL, NTSC
- Input signal level: 1Vpp, 75ohm
- Auto Detection PAL and NTSC
VGA Output
- Connector type: DSUB 15Pin
- Output signal level: R,G,B (0.7Vpp, 75ohm), H/Vsync (3.3Vpp)
- VGA output timing follows VESA Standard
4 way DIP switch for options
- 2 switches for output VGA resolution selection
- 640x480, 800x600, 1024x768, 1280x1024
- 1 switch for output VGA refresh rate select 60Hz, 75Hz
- 1 switch for selecting level of sharpness
Power Requirements (power adapter supplied)
-12 volts DC input - max. 330mA
- Power adapter 110-240 volts AC, 12 volt 6W O/P
Overall Dimensions:
- Case and connectors 141mm x 90 mm x 35 mm
Operating Temperature - 0 - 70 oC
De Interlacing & Image processing Features
3D Y/C separation
- Cross Colour Suppression
- Cross Luminance Suppression (dot crawl suppression)
3D Motion Adaptive Deinterlacing on a per pixel basis
- Adaptive motion-weighted interpolation (for eliminating non-motion artifacts)
- Advanced multi-directional edge preservation
- Fast motion, slow motion and still image detection
- Motion boundary preservation
- Film mode support for 3:2 and 2:2 pull-down
- Bad edit detection and adaptation in film mode
3D Noise Reduction
- Random Gaussian noise reduction without image quality degrade
Image Enhancement
- Sharpness Enhancement
- LTI (Luminance Transient Improvement)
- CTI (Chrominance Transient Improvement)
- Black & White level extension for low light conditions
-
Full 10 bit digital image processing
Video to VGA Converter MPEG4 & JPEG Video Server H264 Video Server and DecoderWireless GSM Router
Please fill out the short form below to receive further data.