ANT-1776ZB is a powerful board based H.265 or H.264 tiny form factor miniature sized encoder/decoder which can be used as a NDAA approved miniature video transcoder or NVR video recorder (or as a standard encoder/decoder – spec below).
The unit can decode RTSP , then re-encode into > H.265/ H.264 , RTSP, MPEG-TS, Unicast, Multicast, RTP, RTMP-(H.264 only).
In addition to the transcode it can also record locally using either EMC or USB (external) storage (not included). The video can be recoded as RAW (for AI learning) or compressed. If no USB stoarge attached it will default to record onto EMMC, but if USB connected it will prioitise storage on USB.
HDMI loop out for the video to be displayed locally if required.
New Features Released:
| Dynamic Encoding | You can change the charecteristics of the encoder on the fly without interrupting the video stream. This includes bit rate, frame rate, resolution etc. This can be done in three ways, via the API, wepage and via a physical interface between the raido RSSI signal strength and the encoder. This is achieved through a look up table, which is editable by the customer. |
| Multiple Audio Codecs Supported | OPUS, MP3 and G711 |
| ONVIF Discovery | ONVIF Discovery is now availble in the firmware, enabling streams to be discovered by an ONVIF VMS or decoder. |
| Ability to record uncompressed / RAW video | These raw video recordings can be then used for AI learning and developemnt. |
| SDP File Creation Tool | This tool is for RTP transmission and it creates a file that you can input into a decoder (usually software), it tells it the charecteristics of the encoder (source). |
| Hosted Code on Chipset | Customers can host their own Linux code within the iMX8 chipset of the ANT-177X range. This enables customistaion of the units. |
| Low Latency Software and Hardware options | Low Latency Player Available on Andoid Tablet and Windows PC/Tablet also low latency hardware to hardware solutions available. |
| Microhard Radio Integration with RSSI Interface | Integration with Microhard radio model PMDDL2450, along with ability to control Microhard radio through the web gui of the encoder. |
| UART to SBUS Modification Possible | If require this can be achieved with an adapter or physical modification* to the board (*OEM terms and MOQ would apply) |
| Artificial Intelligence Options Available | Easy upload option of customer developed AI code developed for Halio 8 AI chipset via web GUI option |
| Simultaneous decode in addition to encoding | Unit can simultaneously decode 1 x stream while encoding up to 3 x inputs. |
| Updated API List | API to discover boards and IP addresses along with control and make changes remotley. |
Coming Soon / In Development
| Two Way Audio | |
| Full ONVIF integration with Pelco D Output | Full ONVIF commands and ONVIF look up table to enable customer to integrate customer software with ONVIF decoding. |
| AES Encryption | AES encrytion on the encoder and decryption by the player. Also to include encryption of recorded video on EMMC and USB OTG. |
| Graphics & Text Overlay | Text and customer uploaded graphic overlay. |
| SDI Interlaced | Support for Interlaced SDI Inputs |
| NTP Clock and Synchronisation | Support for NTP Clock and Synchronisation |
Learn more about the key features
Learn more about the key features
Antrica products are compatible with a range of products
Love your Antrica product? then why not leave a review
Sorry, no reviews match your current selections
|
System |
Mode |
Encoder or Decoder or Transcoder |
|
System Standards |
RTSP, MPEG-TS, Unicast, Multicast, RTP, RTMP |
|
|
System Latency |
<150mS (system dependant) apx 100ms with Neptune Player or App |
|
|
Video |
Compression |
H.264, or H.265 |
|
Profile |
Baseline |
|
|
Frame Rate |
1-60 fps |
|
|
Bit Rate |
10Kbps to 20Mbps |
|
|
Mode |
GOP |
|
|
Bit Rate Control |
CBR, VBR |
|
|
Min Resolution |
320 x 240 |
|
|
Max Resolution |
1920 x 1080 P60 |
|
|
Number of Streams |
Primary 1 x H.265/4 / Secondary 1 x H.265/4 |
|
|
Inputs |
2xLVDSor1xLVDS+1xCVBSor1xCVBS+2xUSB+1xLVDSor1xLVDS+Cameralink+USBandSPI |
|
|
Input Combinations |
2/3/4 (see above) |
|
|
Outputs |
micro HDMI Output (decoder mode only) |
|
|
Output Combinations |
IP (encoder mode) / HDMI (decoder mode) |
|
|
On Screen Display |
English |
|
|
Audio |
Mode |
?? |
|
Compression |
G.711, G.726, MP2, MP3, OPUS |
|
|
Sample Rate |
8kbps, 44.1kbps, 48kbps CODEC dependent |
|
|
Bit Rate |
CODEC dependent |
|
|
Streaming |
TBC |
|
|
Inputs |
Line in , microphone |
|
|
Outputs |
Line out, speaker |
|
|
Network |
Interface |
100-1000 Ethernet RJ45 |
|
Protocols |
IPv4, TCP, UDP, IGMP(Multicast), HTTP, RTSP, DNS |
|
|
Security |
None |
|
|
Configuration |
SDK, WEB |
|
|
Data |
Type |
2 Way UDP to serial support |
|
Interface |
RS-232 |
|
|
Protocol |
Clear |
|
|
Alarm |
n/a |
|
|
Sensor |
n/a |
|
|
Event |
Sources |
n/a |
|
Actions |
n/a |
|
|
Power |
Supply |
5v ±0.1v DC OR 12v ±0.1v DC camera dependent |
|
Adapter input volts |
N/A |
|
|
Adapter Output Voltage |
N/A |
|
|
Consumption |
13W Max (LVDS + USB / camera dependent) |
|
|
Recording |
Edge Storage |
32GB EMMC + USB OTG |
|
Temperature |
Operating Range |
-40C + 85C (Tested to MIL-STD-810G Standard) |
|
Physical |
Dimensions |
58.4 x 48.3 x 9.3cm |
|
Weight |
22g |
|
|
Housing |
PCB Only |
|
|
General |
Certifications |
RoHS |
|
Software |
IP Finder + Player (video decode and display) |
|
|
Warranty |
12 Months |
|
|
Remote |
N/A |
|
|
Reset |
Web interface or IP finder |
|
|
Control & Set Up |
Set Up |
Web interface or API |
|
Control |
Web interface or API |
|
|
Upgrade |
Firmware Upgrade via webpage or IP finder tool |
|
|
In the Box |
Contents |
PCB, Chosen Input Boards and Optional Leads |
|
Power Cable/adapter |
Cable available |
A few of the applications are:
This product is not limited to the markets and applications described. Please download or full application catalogue here.
Explore related Antrica products
Our Antrica main head office is based in the UK and operates on GMT +0hrs / BST hours.
Outside of these business hours please get in touch using the contact form opposite or email sales@antrica.com for purchase enquiries or support@antrica.com for technical support enquiries.
We will respond first thing the next working day.
We have resellers globally who it may be more suitable to deal with on your local time zone. Please click the button below to visit our reseller page and find your local reseller using our map.
Our helpful tool assists you in searching for specific products based on your technical preferences and needs. Helping to find the perfect product for your application.
We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffic. By clicking “Accept All”, you consent to our use of cookies. Cookie Policy
Reviews
There are no reviews yet.