ANT-2014, 4 x HDMI & DVI Channel Input H.264 HD 1080P60 Video Encoder

Product Code: ANT-2014

ANT-2014, 4 x HDMI & DVI Channel Input H.264 HD 1080P60 Video Encoder

Product Overview

Please note this product has been replaced by the newer ANT-2204 which is exactly the same as this unit but with added upgrades / features. CLICK HERE to view.

ANT-2014, 4 x HDMI & DVI Channel Input H.264 HD 1080P60 Video Encoder, capable of up to a maximum 4 x (1920 x 1080) at 60 frames per sec encode with quad streaming using an IP LAN ethernet connection.

The inputs are 4 x HDMI or DVI. Inputs and outputs are provided to allow for signal bypassing or looping.

Multiple streaming formats are supported such as HTTP, RTSP, RTMP and MPEG-TS over UDP.

The encoder is powered via 12V but has an internal AC to 12v DC converter.A single IEC kettle lead style socket with power lead supplied.

AAC  G711 and MP3 audio is supported with embedded audio in HDMI.

There is no RS232/485/422 2 way serial data communication, motion detection , sensor and alarm I/O, please see the ANT-35000A/H for this feature.

Rack mountable 1U style case with 4 individual encoders housed within..

 

product REviews

Love your Antrica product? then why not leave a review

Reviews

There are no reviews yet.

Be the first to review “ANT-2014, 4 x HDMI & DVI Channel Input H.264 HD 1080P60 Video Encoder”

Your email address will not be published. Required fields are marked *

0 of 0 reviews

Sorry, no reviews match your current selections

Product information and support

Explore below for more information on the ANT-2014 video encoder.
  • 4 x HDMI or DVI
  • H.264 HD Video Encoder
  • Up to 4 x 1920 x 1080 at 60 frames per sec encode
  • Dual streaming per input using an IP LAN ethernet connectionI
  • The 4 x HDMI or DVI inputs and outputs allow for signal bypassing or looping
  • HTTP, RTSP, RTMP and MPEG-TS over UDP
  • Powered via 110/240 v AC input (internal 12 v DC)
  • AAC  G711 and MP3 audio
  • Embedded audio in HDMI
  • Rack mountable 1U

 

System Mode Encoder
System Standards ONVIF Discovery, RTSP, RTMP,HTTP, MPEG-TS
System Latency >150mS (system dependant)
Video Compression H.264
Video Profile Base, Main or High
Video Frame Rate 1-60 fps
Video Bit Rate 16-12 mbps
Video Mode GOP
Video Bit Rate Control CBR, VBR
Video Min Resolution 320 x 180
Video Max Resolution 1920 x 1080
Video Number of Streams Primary 4 x H.264 / Secondary 4 x H.264
Video Inputs 4 x HDMI (DVI)
Video Input Combinations All 4 Input
Video Outputs 4 x HDMI (DVI)
Video Output Combinations All 4 Output
Video On Screen Display English
Audio Mode Simplex Stereo
Audio Compression G.711 + AAC + MP3
Audio Sample Rate G711 = 8Khz , AAC= 32/44.1kHz MP3 = 32/44.1kHz
Audio Bit Rate G711=64kbps, AAC= 24-256kb/s MP3 = 24-256kb/s
Audio Streaming 1 Way Stereo
Audio Inputs Analogue Stereo Jack (1vpp) or Embedded Audio
Audio Outputs Embedded Audio
Network Interface 10-100 Ethernet RJ45
Network Protocols IPv4, TCP, UDP, IGMP(Multicast), DHCP,HTTP, RTP,RTSP, DNS
Network Security Password Protection
Network Configuration SDK, WEB
Data Type N/A
Data Interface N/A
Data Protocol N/A
Data Alarm N/A
Data Sensor N/A
Event Sources N/A
Event Actions N/A
Power Supply 12v Internal
Power Adapter input volts AC 110-240v input IEC style kettle lead
Power Adapter Output Voltage 240v Internal
Power Consumption 39w
Recording Edge Storage N/A
Temperature Operating Range 0 + 50C
Physical Dimensions 490 x 290 x 44 mm
Physical Weight 3.3kg
Physical Housing Black Aluminum
General Certifications CE , FCC, RoHS
General Software N/A
General Warranty 12 Months
General Remote N/A
General Reset Web or external
Control & Set Up Set Up Web Interface API Document
Control API
Upgrade Firmware Upgrade
In the Box Contents Encoder , Internal Power Supply & Lead, 4 x HDMI, & Rack Mount
Power Cable/adapter 1 of either UK/US/EU/China/Aus

A few of the applications are:

  • Encode a PC screen and send to a VMS for monitoring, recording and litigation purposes
  • Encode video from a piece of medical equipment and send to remote consultant to oversee the procedure
  • Encode multiple Set Top Boxes for viewing remotely elsewhere

This product is not limited to the markets and applications described.

Antrica UK

Our Antrica main head office is based in the UK and operates on GMT +0hrs / BST hours.

Outside of these business hours please get in touch using the contact form opposite or email sales@antrica.com for purchase enquiries or support@antrica.com for technical support enquiries.

We will respond first thing the next working day.

Head office UK, Europe & the rest of the world

Resellers

We have resellers globally who it may be more suitable to deal with on your local time zone. Please click the button below to visit our reseller page and find your local reseller using our map.

Make an enquiry

Contact Details
Product & enquiry

Need Help finding a product?

Our helpful tool assists you in searching for specific products based on your technical preferences and needs. Helping to find the perfect product for your application.

We value your privacy

We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffic. By clicking “Accept All”, you consent to our use of cookies. Cookie Policy

Emails: If you have emailed us and not received a response within 24hrs please chat to us (bottom right) so we can resolve the issue